Tumblelog by Soup.io
Newer posts are loading.
You are at the newest post.
Click here to check if anything new just came in.

period of time filled with good MOTOROLA MTX960 Two Way Radio Battery

In some special occasions, people need to be in a very short period of time filled with good MOTOROLA MTX960 Battery, it is need to use ultra high speed charger. Because of ultra-high speed charger requires a great deal of charging current, some even use 2 c - 3 c of the charging current, the heating problem is particularly serious, just using cosine wave charge is not enough, so this kind of charger is used a lot in a cosine wave insert after a short discharge this method. This approach can alleviate because the potential consumption charging current generated heat accumulation, thus further control temperature.We to the MOTOROLA MTX960 Two Way Radio Battery to use than battery nominal voltage slightly high voltage, and the battery itself to the charging current will produce a negative potential, therefore it is part of the current to offset against potential and work in vain, into heat energy. When the charging current is larger, more electrical energy is converted into heat energy, charge when the temperature is higher. High temperature to charge the battery is harmful,In the slow speed constant current charger, because is slow charging, the quantity of heat of generation in the control range, therefore does not need to take special measures.

Use quick charger of another problem is, when the charging time if forget after stop charging, the cell damage will far outweigh the slow speed constant current charger overcharge produce damage. So in order to solve the overcharge problem, quick charger is generally adopted such as voltage slope judgment method to judge the battery is nearing full of, these chargers are using the control circuit or IC chip to complete the task. When the battery is full of close, the control circuit will be transferred to trickle charging mode, to the battery to trickle charge. The trickle current to the battery to charge the advantage is obvious.

But in the fast automatic charger, the fast charging flow can produce higher temperature. So currently on the market fast automatic charger has adopted various methods to reduce the MOTOROLA MTX960 Battery charge temperature, usually the use of cosine method, that is to say not with constant current charge, but like cosine wave that current intensity change, so that can ease the heat accumulation, and the temperature control in a certain range. Because this kind of charger no longer use constant current charging, and past constant current charger are obviously different.

One such as stated above, trickle charging the MOTOROLA MTX960 Two Way Radio Battery can be very full, secondly is don't have to worry about the problem of overcharge, so use this kind of charger biggest advantage is that don't have to computing time. The specific method of use can view their specifications, in case of improper operation. Quick charger has a branch is superfast charger, this kind of charger application range is not big, design, structure and process are complex, so the price is quite expensive.

Don't be the product, buy the product!